Products Catalog

CON-SERV Inc offers (3) basic disc bearing types: fixed, guided, and free-moving. In order to give the engineer typical dimensional data, the following criteria was adopted by CON-SERV Inc. as standard for the bearing detailed.
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.

Standard Design Criteria:

• Steel Type – A588 (Y.P. = 50 KSI)
• Rotation Capacity - .02 radians
• Maximum Pressure on Elastomer – 3500 psi for pots to 5000 psi for discs
• Coefficient of friction - .03
• Lateral Load Capacity – 10% of Vertical (unless noted otherwise) Load (Fixed and Guided) – Maximum for Standard Design
• Movement ± 1” – Maximum for Standard Design

CON-SERV Inc offers (3) basic disc bearing types: fixed, guided, and free-moving. In order to give the engineer typical dimensional data, the following criteria was adopted by CON-SERV Inc. as standard for the bearing detailed.
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.

Standard Design Criteria:

• Steel Type – A588 (Y.P. = 50 KSI)
• Rotation Capacity - .02 radians
• Maximum Pressure on Elastomer – 3500 psi for pots to 5000 psi for discs
• Coefficient of friction - .03
• Lateral Load Capacity – 10% of Vertical (unless noted otherwise) Load (Fixed and Guided) – Maximum for Standard Design
• Movement ± 1” – Maximum for Standard Design

CON-SERV Inc offers (3) basic disc bearing types: fixed, guided, and free-moving. In order to give the engineer typical dimensional data, the following criteria was adopted by CON-SERV Inc. as standard for the bearing detailed.
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.

Standard Design Criteria:

• Steel Type – A588 (Y.P. = 50 KSI)
• Rotation Capacity - .02 radians
• Maximum Pressure on Elastomer – 3500 psi for pots to 5000 psi for discs
• Coefficient of friction - .03
• Lateral Load Capacity – 10% of Vertical (unless noted otherwise) Load (Fixed and Guided) – Maximum for Standard Design
• Movement ± 1” – Maximum for Standard Design

CON-SERV Inc offers (3) basic disc bearing types: fixed, guided, and free-moving. In order to give the engineer typical dimensional data, the following criteria was adopted by CON-SERV Inc. as standard for the bearing detailed.
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.

Standard Design Criteria:

• Steel Type – A588 (Y.P. = 50 KSI)
• Rotation Capacity - .02 radians
• Maximum Pressure on Elastomer – 3500 psi for pots to 5000 psi for discs
• Coefficient of friction - .03
• Lateral Load Capacity – 10% of Vertical (unless noted otherwise) Load (Fixed and Guided) – Maximum for Standard Design
• Movement ± 1” – Maximum for Standard Design