CON-SERV Inc offers (3) basic pot bearing types: fixed, guided,
and free-moving. In order to give the engineer typical dimensional
data, the following criteria was adopted by CON-SERV Inc. as standard
for the bearing detailed.
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.
Standard Design Criteria:
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.
Standard Design Criteria:
- Steel Type – A588 (Y.P. = 50 KSI)
- Rotation Capacity - .02 radians
- Maximum Pressure on Elastomer – 3500 psi for pots to 5000 psi for discs
- Coefficient of friction - .03
- Lateral Load Capacity – 10% of Vertical (unless noted otherwise) Load (Fixed and Guided) – Maximum for Standard Design
- Movement ± 1” – Maximum for Standard Design
Unit of Measure
Type |
N/A Center Guided |
Vertical Load (K) |
N/A 50 |
I.D. Pot (in.) |
N/A 4.50 |
A (in.) |
N/A 6.00 |
B (in.) |
N/A 1.38 |
C (in.) |
N/A 1.86 |
D (in.) |
N/A 4.38 |
E (in.) |
N/A 8.50 |
Material |
N/A 16 GA Stainless Steel 3/16 in. Polytetrafluoroethylene (PTFE) Thickness |
