Item # 06CHP 13CS 50L HT, Insulated Hi-temperature, Lo-Friction Assemblies On Con-Serv, Inc.

This bearing system enables the designer to enjoy the low friction of PTFE at a bearing point temperature above the use limit (500°F) of PTFE.
These bearings provide a coefficient of friction less than 3% at a design pressure of 2500 psi (max.) with little variation at lesser pressures.

The bearings can be installed with a stitch weld 1/2 inch long 3 inch on center on all sides. The upper and lower units must be backed up with structural plates so that a uniform load is transmitted into the unit. Bending of the units is unacceptable.

Unit of Measure

Specifications

Element	N/A Lower
Max. Use Temperature (°F)	N/A 800
Design Pressure (psi)	N/A 2500
Coefficient of Friction	N/A < 3%
Lip	N/A 50L

Specifications

Element

Max. Use Temperature (°F)

Design Pressure (psi)

Coefficient of Friction

Lip