Item # CPB-125CG (2), Center Guided Type On Con-Serv, Inc.

CON-SERV Inc offers (3) basic pot bearing types: fixed, guided, and free-moving. In order to give the engineer typical dimensional data, the following criteria was adopted by CON-SERV Inc. as standard for the bearing detailed.
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.

Standard Design Criteria:

Steel Type – A588 (Y.P. = 50 KSI)
Rotation Capacity - .02 radians
Maximum Pressure on Elastomer – 3500 psi for pots to 5000 psi for discs
Coefficient of friction - .03
Lateral Load Capacity – 10% of Vertical (unless noted otherwise) Load (Fixed and Guided) – Maximum for Standard Design
Movement ± 1” – Maximum for Standard Design

Unit of Measure

Specifications

Type	N/A Center Guided
Vertical Load (K)	N/A 125
I.D. Pot (in.)	N/A 7.00
A (in.)	N/A 8.50
B (in.)	N/A 1.50
C (in.)	N/A 1.89
D (in.)	N/A 4.63
E (in.)	N/A 11.00
Material	N/A 16 GA Stainless Steel 3/16 in. Polytetrafluoroethylene (PTFE) Thickness

Specifications

Type

Vertical Load (K)

I.D. Pot (in.)

A (in.)

B (in.)

C (in.)

D (in.)

E (in.)

Material