Con-Serv, Inc. - 10 Percent Lateral Load Outside Guided Disc Type

CON-SERV Inc offers (3) basic disc bearing types: fixed, guided, and free-moving. In order to give the engineer typical dimensional data, the following criteria was adopted by CON-SERV Inc. as standard for the bearing detailed.
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.

Standard Design Criteria:

Steel Type – A588 (Y.P. = 50 KSI)
Rotation Capacity - .02 radians
Maximum Pressure on Elastomer – 3500 psi for pots to 5000 psi for discs
Coefficient of friction - .03
Lateral Load Capacity – 10% of Vertical (unless noted otherwise) Load (Fixed and Guided) – Maximum for Standard Design
Movement ± 1” – Maximum for Standard Design

Request Information

Unit of Measure

Items	CDB-50G10 (2) 10 Percent Lateral Load Outside Guided Disc Type	CDB-75G10 (2) 10 Percent Lateral Load Outside Guided Disc Type	CDB-100G10 (2) 10 Percent Lateral Load Outside Guided Disc Type	CDB-125G10 (2) 10 Percent Lateral Load Outside Guided Disc Type	CDB-150G10 (2) 10 Percent Lateral Load Outside Guided Disc Type
Type	N/A Guided
Lateral Load Capacity	N/A 10% of Vertical Load
Vertical Load (K)	N/A 50	N/A 75	N/A 100	N/A 125	N/A 150
I.D. Pot (in.)	N/A 5.25	N/A 5.75	N/A 6.00	N/A 6.88	N/A 7.13
A (in.)	N/A 10.25	N/A 10.75	N/A 11.00	N/A 12.00	N/A 12.25
B (in.)	N/A 0.75	N/A 0.75	N/A 0.75	N/A 0.75	N/A 0.88
C (in.)	N/A 1.00	N/A 1.00	N/A 1.00	N/A 1.00	N/A 1.13
D (in.)	N/A 3.66	N/A 3.66	N/A 3.66	N/A 3.78	N/A 4.03
E (in.)	N/A 8.50	N/A 9.00	N/A 9.25	N/A 10.25	N/A 10.50
F (in) Base	N/A 6.25	N/A 6.75	N/A 7.00	N/A 8.00	N/A 8.25
Material	N/A 16 GA Stainless Steel 3/16 in. Polytetrafluoroethylene (PTFE) Thickness

Products Catalog