Wear is negligible when sliding against itself. Graphite may be purchased bonded to steel back-up plates or structural shapes as the job may require. Bonding epoxy is available.The maximum temperature limit on the epoxy is 300°F. Hi-temperature applications require mechanical attachment of the graphite.
Unbonded flats are typically 1/2" thick. Bonded 1/4" graphite to 1/4" steel is specified as 25CG 25CS 50L. Typically the steel plate is 1" larger in both width and length than the graphite for field welding.
Standard Design Criteria:
Unbonded flats are typically 1/2" thick. Bonded 1/4" graphite to 1/4" steel is specified as 25CG 25CS 50L. Typically the steel plate is 1" larger in both width and length than the graphite for field welding.
Standard Design Criteria:
- Comprehensive Strength: 2000 psi
- Coefficient of friction: Static 0.15
- Maximum Service Temperature: 750° F on graphite
Unit of Measure
Type |
N/A GRC |
Pipe Dia. Range (in.) |
N/A 1 - 2 |
Width (in.) |
N/A 1 |
Length (in.) |
N/A 12 |
Comprehensive Strength (psi) |
N/A 2000 |
Coefficient of Friction |
N/A Static 0.15 |
Max. Use Temperature (°F) |
N/A 300 |
Maximum Service Temperature on Graphite (°F) |
N/A 750 |
