Graphite Cradles & Graphite Steel Backed Slide Plates On Con-Serv, Inc.

Wear is negligible when sliding against itself. Graphite may be purchased bonded to steel back-up plates or structural shapes as the job may require. Bonding epoxy is available.The maximum temperature limit on the epoxy is 300°F. Hi-temperature applications require mechanical attachment of the graphite.
Unbonded flats are typically 1/2" thick. Bonded 1/4" graphite to 1/4" steel is specified as 25CG 25CS 50L. Typically the steel plate is 1" larger in both width and length than the graphite for field welding.

Standard Design Criteria:

Comprehensive Strength: 2000 psi
Coefficient of friction: Static 0.15
Maximum Service Temperature: 750° F on graphite

1 - 6 of 6 | Results Per Page | View | Unit of Measure

Request Information Compare Items

Item #	Pipe Dia. Range (in.)	Width (in.)	Length (in.)	Comprehensive Strength (psi)	Coefficient of Friction

CS-GRC-1	N/A 1 - 2	N/A 1	N/A 12	N/A 2000	N/A Static 0.15
CS-GRC-2	N/A 2 1/2 - 5	N/A 2	N/A 12	N/A 2000	N/A Static 0.15
CS-GRC-3	N/A 6 - 10	N/A 3	N/A 12	N/A 2000	N/A Static 0.15
CS-GRC-4	N/A 12 - 16	N/A 4	N/A 12	N/A 2000	N/A Static 0.15
CS-GRC-5	N/A 18 - 24	N/A 6	N/A 12	N/A 2000	N/A Static 0.15
CS-GRC-6	N/A 26 - 30	N/A 8	N/A 12	N/A 2000	N/A Static 0.15

1 - 6 of 6 | Results Per Page | View | Unit of Measure

Products Catalog

Item #

Pipe Dia. Range (in.)

Width (in.)

Length (in.)

Comprehensive Strength (psi)

Coefficient of Friction