Con-Serv, Inc. - Graphite Cradles & Graphite Steel Backed Slide Plates

Wear is negligible when sliding against itself. Graphite may be purchased bonded to steel back-up plates or structural shapes as the job may require. Bonding epoxy is available.The maximum temperature limit on the epoxy is 300°F. Hi-temperature applications require mechanical attachment of the graphite.
Unbonded flats are typically 1/2" thick. Bonded 1/4" graphite to 1/4" steel is specified as 25CG 25CS 50L. Typically the steel plate is 1" larger in both width and length than the graphite for field welding.

Standard Design Criteria:

Comprehensive Strength: 2000 psi
Coefficient of friction: Static 0.15
Maximum Service Temperature: 750° F on graphite

Request Information

Unit of Measure

Items	CS-GRC-1 Graphite Cradles & Graphite Steel Backed Slide Plates	CS-GRC-2 Graphite Cradles & Graphite Steel Backed Slide Plates	CS-GRC-3 Graphite Cradles & Graphite Steel Backed Slide Plates	CS-GRC-4 Graphite Cradles & Graphite Steel Backed Slide Plates	CS-GRC-5 Graphite Cradles & Graphite Steel Backed Slide Plates
Type	N/A GRC
Pipe Dia. Range (in.)	N/A 1 - 2	N/A 2 1/2 - 5	N/A 6 - 10	N/A 12 - 16	N/A 18 - 24
Width (in.)	N/A 1	N/A 2	N/A 3	N/A 4	N/A 6
Length (in.)	N/A 12
Comprehensive Strength (psi)	N/A 2000
Coefficient of Friction	N/A Static 0.15
Max. Use Temperature (°F)	N/A 300
Maximum Service Temperature on Graphite (°F)	N/A 750

Products Catalog