Wear is negligible when sliding against itself. Graphite may be purchased bonded to steel back-up plates or structural shapes as the job may require. Bonding epoxy is available.The maximum temperature limit on the epoxy is 300°F. Hi-temperature applications require mechanical attachment of the graphite.
Unbonded flats are typically 1/2" thick. Bonded 1/4" graphite to 1/4" steel is specified as 25CG 25CS 50L. Typically the steel plate is 1" larger in both width and length than the graphite formore
Unbonded flats are typically 1/2" thick. Bonded 1/4" graphite to 1/4" steel is specified as 25CG 25CS 50L. Typically the steel plate is 1" larger in both width and length than the graphite formore
Wear is negligible when sliding against itself. Graphite may be purchased bonded to steel back-up plates or structural shapes as the job may require. Bonding epoxy is available.The maximum temperature limit on the epoxy is 300°F. Hi-temperature applications require mechanical attachment of the graphite.
Unbonded flats are typically 1/2" thick. Bonded 1/4" graphite to 1/4" steel is specified as 25CG 25CS 50L. Typically the steel plate is 1" larger in both width and length than the graphite for field welding.
Standard Design Criteria:
less
Unbonded flats are typically 1/2" thick. Bonded 1/4" graphite to 1/4" steel is specified as 25CG 25CS 50L. Typically the steel plate is 1" larger in both width and length than the graphite for field welding.
Standard Design Criteria:
- Comprehensive Strength: 2000 psi
- Coefficient of friction: Static 0.15
- Maximum Service Temperature: 750° F on graphite
less
Unit of Measure
Type |
N/A GRC |
Pipe Dia. Range (in.) |
N/A 12 - 16 |
Width (in.) |
N/A 4 |
Length (in.) |
N/A 12 |
Comprehensive Strength (psi) |
N/A 2000 |
Coefficient of Friction |
N/A Static 0.15 |
Max. Use Temperature (°F) |
N/A 300 |
Maximum Service Temperature on Graphite (°F) |
N/A 750 |